The polyacrylamide produced by our company has obtained the EU Reach certification. It is widely used in the oilfield extraction, wastewater treatment, mineral processing and other fields in the European market. In the processes of flocculation and sedimentation as well as sludge dewatering, its usage has been significantly reduced, thereby saving costs for local enterprises and improving production efficiency.
Polyacrylamide is abbreviated as PAM. It is a high-molecular polymer formed by the copolymerization of acrylamide and other monomers. The solid appearance of the product is white granular powder, which is soluble in water but insoluble in organic solvents. It is widely used in fields such as papermaking, mining, coal washing, metallurgy, and oil extraction. Currently, it is an important chemical in the water treatment field.
Product Specifications
| CAS No. | 9003-05-8 | ||
| Appearance | White grain powder | ||
| Polyacrylamide type | Cationic Polyacrylamide | Nonionic Polyacrylamide | Anionic Polyacrylamide |
| Molecular weight (Million) | 3-12 | 3-12 | 3-25 |
| Ionization degree % | 5-80 | / | / |
| Hydrolysis Degree % | / | 0-5 | 10-40 |
| pH Value | 4-9 | 4-12 | 4-12 |
| Solid content (%) | ≥ 90 | ||
| Dissolution time | ≤ 90 Min | ||
| Remaining monomer (%) | ≤ 0.1 | ||
Product Application Introduction
Anionic polyacrylamide is used for various sewage purification, and is suitable for sewage with a neutral or alkaline pH value. It is usually used in combination with inorganic coagulants such as aluminum sulfate, polyaluminum chloride, and polyferric sulfate, which can reduce the dosage and increase the effect.
Cationic polyacrylamide is a water-soluble linear polymer and a quaternary cationic monomer with a high molecular weight. It absorbs suspended solid particles in water, bridges and neutralizes the charge between the particles, and aggregates the polyacrylamide to form large flocculent particles. It effectively improves solid-liquid separation processes in municipal and all industrial wastewater treatment processes, particularly in sludge dewatering processes such as belt presses, plate presses, screw presses, and decanter centrifuges.
Product Usage
Before using polyacrylamide, it must be dissolved in water in the prescribed ratio. The dissolution time is approximately 40-60 minutes. The water temperature should be controlled below 40℃. The prepared solution should be used on the same day. The specific dosage needs to be determined through a beaker experiment. When using other coagulants, the coagulant should be used first, and then the flocculant should be added after mixing. Avoid mixing the two products at the same time.
Product Packaging and Storage
Polyacrylamide is packaged in 25 kg bags lined with thick plastic film. Custom packaging is also available upon request.
Polyacrylamide should be stored in a cool, well-ventilated area, away from direct sunlight and moisture.
Product Delivery Time
Orders of 20 tons will ship within 3 days;
Orders of 50 tons will ship within 5 days;
Orders of 100 tons will ship within 7 days.
Company Profile
As a leading manufacturer and supplier of water treatment chemicals, with an annual production capacity of 50,000 tons, we manufacture and sell cationic, anionic, and nonionic polyacrylamide. Headquartered in Gongyi City, Henan Province, we enjoy a strategic location and convenient transportation. This facilitates communication and collaboration with domestic and international partners, enabling us to quickly respond to market demands and provide efficient, professional, and environmentally friendly solutions. Our products are sold to over 80 countries in the Middle East, Africa, North America, Latin America, and Southeast Asia.
We have obtained the Quality Service Integrity Certification (2021), ISO9001 Quality Management System Certification (2022), ISO14001 Environmental Management System Certification (2023), and ISO45001 National Health and Safety Management System Certification (2023).
We are committed to helping our customers compete effectively in an ever-changing market by offering competitive pricing, stable supply, guaranteed quality, timely response, and comprehensive after-sales service.
Hot Tags: polyacrylamide polymer white wastewater treatment chemicals flocculant cas 9003-05-8, China polyacrylamide polymer white wastewater treatment chemicals flocculant cas 9003-05-8 manufacturers, suppliers, cross linked polyacrylamide, partially hydrolysed polyacrylamide, polyacrylamide cost, polyacrylamide flocculant, polyacrylamide in water, polyacrylamide price per kg
