Industrial Polyacrylamide Particles PAM Waste Water Treatment Chemicals Flocculant

Product Description

Polyacrylamide is a linear high-molecular polymer formed by the homopolymerization of acrylamide or copolymerization with other monomers. It has thickening, flocculating and fluid regulating functions. It is widely used in water treatment, oil extraction, printing and dyeing, textile, papermaking and other fields. When using polyacrylamide, we should ensure that it is used under good conditions so as to achieve the best effect.

Polyacrylamide Specifications

CAS number: 9003-05-8

HS code: 39069010

Molecular formula: (C₃H₅NO)n

Product Model: A7258

Polyacrylamide can be affected by external factors during use, so we should minimize these issues.

1. The Impact of Dissolution Time on Flocculation Performance

Solid polyacrylamide is in granular form and needs to be dissolved before use. The time required for complete dissolution varies depending on the product type and specifications. To dissolve polyacrylamide, use clean water. Slowly and evenly pour the polyacrylamide granules into the stirring water according to the desired proportion. Over time, the polyacrylamide slowly dissolves in the water, and the viscosity of the aqueous solution also increases. This viscosity is related to the molecular weight of the polyacrylamide. When the polyacrylamide is completely dissolved in the water, the aqueous solution becomes transparent, indicating optimal solubility of the polyacrylamide.

2. Temperature's Effect on the Dissolution Rate of Polyacrylamide

Temperature significantly affects the dissolution time of polyacrylamide. If the water temperature is too low, the dissolution rate will be very slow. In this case, raising the water temperature can increase the dissolution rate. However, be sure to keep the water temperature below 40°C, as this will increase the degradation rate of the polyacrylamide.

3. The Effect of Molecular Weight on Polyacrylamide Viscosity

The viscosity of polyacrylamide increases with molecular weight. As the molecular weight increases, the polymer strands begin to interpenetrate, creating numerous contact points between the chains in the solution, giving the polymer a gel-like appearance. The higher the molecular weight, the more likely the molecules are to form entanglements, resulting in a higher viscosity for the solution.

4. Effect of Dosage on Flocculation Performance

When the dosage of polyacrylamide is too low, the flocculation effect is insignificant. When the dosage is increased appropriately, stronger flocs form, achieving the best flocculation results. However, if the dosage is too high, the water viscosity increases, resulting in excessive residual polyacrylamide. This also causes the sludge to form large flocs, making it difficult to remove the entrained water in the filter press, resulting in a high moisture content in the sludge cake.

Product Packaging

Our standard packaging options are 25 kilograms per bag or ton bags. We can also customize the packaging according to customer requirements.

Our Advantages

1. Quality Assurance: Advanced equipment and technology are adopted to ensure the quality and safety of the products.

2. Delivery Guarantee: With an annual output of 50,000 tons, abundant inventory and a wide range of models, we can guarantee prompt delivery.

3. Excellent Team: We have a team with rich experience, proficient skills and excellent technical expertise.

4. Thoughtful Service: We are committed to meeting customers' demands with a "superior and trustworthy" attitude.